Technology

10 Expensive Plumbing Mistakes You Should Avoid

Most of the time, people tend to ignore minor plumbing issues, which develop into unforeseen disasters. Sometimes, we even try to remedy these issues ourselves, which again could make them worse. 

There is no harm in trying a DIY as a temporary fix if you still have it checked by your plumber in Melbourne soon. Plumbing is one area that needs a professional’s knowledge. 

That is why you should beware of the many potential mistakes that can occur in plumbing as a homeowner. Some of these mistakes are small and easily fixable, while others can be extremely costly. 

Here are 10 costly mistakes in plumbing you should be aware of:

1. Not Insulating Pipes 

Pipelines tend to freeze over and break in winter. A simple enough solution to it is insulating the pipes. 

Making the mistake of leaving your pipes without insulation can bring about costly repairs for your home. So make sure your water pipes are properly insulated, or they can freeze and burst during Melbourne’s cold weather. 

2. Clogged Drain 

Because clogged drains are so common, we usually try a DIY trick and fix it. However, a clogged drain can quickly turn into a plumbing nightmare. It may even be a sign of something severe. 

If left untreated, a clogged drain can lead to sewage backup, flooding, and serious water damage. Therefore, you should regularly clean your drains to avoid costly repairs afterwards.

Even if you try a DIY to temporarily bring the situation under control, you should still call for a professional plumber to ensure there’s nothing serious about it. 

3. Running Toilet 

A running toilet is not only annoying but is also a waste of water. If your toilet is running, it could be due to a faulty flapper or fill valve. Replacing these parts is cheap and easy, but if left untreated, a running toilet can waste hundreds of gallons of water each day.

Ultimately, it would only escalate your water bill. Thus, getting it repaired as fast as you can is a need. You may also go for a specialist, such as a blocked toilet specialist in Melbourne, to understand the real cause.

4. Leaky Faucets 

Every home has or will have seen a leaky faucet. It’s almost inevitable. Though these are expected, leaky faucets are not a small problem. Leaking taps can run through a lot of water and raise your water bill. 

So, you must be sure to fix any leaky faucets as soon as possible to avoid wasting water and money.

5. Hiked Water Heater Bills 

If your water heater is not working properly, it could cost you a lot of money in energy bills each month. 

The solution to this is to have your water heater regularly serviced to keep it operating efficiently and save money on your energy bill. 

We use water heaters every day, so we notice every little problem with them immediately. But we neglect them till they create a big mess. Thus, you have to ensure your appliance is in proper working condition at all times. 

6. Ignoring Plumbing Problems 

Many people make the mistake of ignoring plumbing problems until they become big (and expensive). Do not wait until your sink is overflowing or your toilet is backing up before you call a plumber. 

It is advised to address any small plumbing issues as soon as possible to avoid bigger (and more expensive) problems down the road. 

7. Tree Root Infiltration   

Tree roots growing into sewer lines is a common problem that often goes undetected until significant damage is done. 

Tree roots are drawn to the pipelines for their moisture. Once it happens, it leads to severe blockages and pipeline breakages. 

This type of damage can be very costly to repair, so it’s important to have tree roots checked regularly by a professional plumber. You can schedule appointments in regular intervals to make it easier.

8. Corroded Pipes    

Over time, pipes can become corroded, leading to leaks and other serious problems. If caught early enough, corroded pipes can often be repaired. But if left unchecked, they will need to be replaced, which is much more costly.    

Some signs that your pipes are corroded are discoloured water and frequently clogged drains. As soon as you notice these signs, you should call for a professional plumber and get them repaired.

9. Inadequate Drainage    

Poor drainage around your home can lead to flooded basements, soggy yards, and landscaping erosion. All these problems can be avoided by assuring that your home has proper drainage.    

The most common drainage mistake is disposing of grease and food waste into the sink. It could develop drain clogs and eventually block your pipes completely. So, it is essential to take proper care of your drainage system. 

10. Outdated Plumbing    

Finally, you should also consider your home’s overall plumbing efficiency. If your home has outdated plumbing, it is likely not as efficient as newer homes. It means that you could be paying more for water and energy each month. 

Updating your plumbing is an investment that will pay off in the long run.      

Final Word

These are some of the many costly mistakes that can occur in plumbing. Keep these tips in mind to avoid any costly repairs down the road.

We know it is impossible to check every fixture and fitting daily, but there is a solution. Schedule regular maintenance checks with your plumber, and everything will sort itself out. 

To get started, you can get in touch with Your Local Plumbing and discuss your needs. There are also 24/7 plumbers in Melbourne to rescue you from emergencies. 

So, all you have to do is keep a few plumbers’ contacts, so you will not be alone in a time of need.

Christopher Stern

Christopher Stern is a Washington-based reporter. Chris spent many years covering tech policy as a business reporter for renowned publications. He has extensive experience covering Congress, the Federal Communications Commission, and the Federal Trade Commissions. He is a graduate of Middlebury College. Email:[email protected]

Related Articles

Back to top button