One of the most frequent concerns installers hear after finishing a carpet installation is about carpet seams. Many homeowners aren’t familiar with carpet seaming, so they might not be happy with the installation once they notice a seam. Professional carpet repair Brisbane experts can provide effective solutions for such problems. Such instances can also fuel the flames if the carpet installer doesn’t define carpet seams. So, getting an understanding of carpet seams is essential to preventing issues with them.
What Are Carpet Seams?
A seam forms when two independent carpet pieces, or other floorings, are put in the same space. For instance, two different carpet cuts are required for a 12 x 12 bedroom with a wardrobe. The seam is created where the carpet’s two edges come together at the closet’s door. This carpet seam should be as undetectable as possible.
Compared to services that provide carpet cleaning, carpet repair coorparoo, or carpet restretching Brisbane, unskilled carpet and flooring installers frequently overlook this or need to be instructed on handling seams. This lack of knowledge and skills leads to the following:
- Failure to disclose the location of the seams in advance
- Seaming is done on the carpet in more noticeable places
- At the end of the seams, there are gaps
- Carpet seams that aren’t level
- Broad gaps and overlaps
- Failure to match any carpet patterning
Best Ways to Repair Noticeable Seams in Carpet
Thankfully, there are some ways you can fix the carpet seams by yourself. You don’t have to tear up your carpet and install a brand-new rug if it has some wear from traffic or improper installation. You can fix it and cover the carpet seams to restore the aesthetic appeal of your floors. You will require essential equipment, supplies, knowledge, and patience to complete this task. If you find this to be a tedious task, you can hire services like carpet repair Pimpama. For DIY carpet seam repair, you will require the following:
- Tape for seaming carpet
- Sewing machine
- Glue sticks and a glue gun
- Some heavy object
- A seam comb
You must identify the cause of your seams’ separation if you want to solve a seaming issue. Either seam peaking or seam breaking typically causes that.
Seams are pushed upward by pressure and create a little peak in the carpet, which is known as seam peaking. This will create a clear line that runs the entire length of the seam. Due to seam peaking, improperly laid carpet occasionally has a lot of ugly lines. Usually, it happens due to stretching the carpet too tightly or using an iron that is too hot.
Seam splitting is the second most frequent seam problem. As a result, the carpet’s seams separate, exposing the floor below. This typically happens due to prolonged or rough use, poor installation quality of the carpet or seaming tape, or all three. If the problem is minor and the region doesn’t get much foot traffic, re-gluing or re-taping the damaged seam is the best repair. To do this, apply glue with a glue gun underneath the carpet’s seam, and then weigh down the afflicted area of the rug for whatever long it takes for the glue to dry, usually several hours.
Changing the seaming tape and seaming the carpet pieces again is preferable if the issue is more severe or the carpet experiences significant wear and tear. To accomplish this:
Remove the old seaming tape and place the fresh tape between the two carpet pieces.
Push the seams onto the video with a seaming iron to ensure that both parts of the carpet firmly adhere to the seam tape. Allow it to dry and cool while putting weights or another heavy object against that part. Use a seam comb to smooth out the carpet after removing the weight by going through the seam.
If you need clarification about whether these methods can save your carpet or if you are having seam issues, it is best to consult carpet repair Brisbane services. Professionals provide carpet restretching, fixing carpet burns, repairing carpet seams, etc.
