Diamond Drilling is a robust method for precise cutting through solid materials. It is a heavy instrument which needs to be handled by trained experts. Due to this reason, the work involves occupational hazards. Any demolition process is crucial for health and safety. Diamond drilling companies must provide workers with a safe, accident-free, and healthy environment. They should always ensure that their staff perform the drilling with the necessary safety gear.

The article will be helpful to beginners in learning about the health and safety of drilling. To be safe, newcomers must be aware of the dos and don’ts of diamond drilling. Proper safety compliances will help them to carry out tasks accurately. Knowing how to use the tools properly and using them to carry out diamond drilling safely will prevent accidents.

For the diamond drilling companies, it is necessary and for their benefit to know about safety regulations, so CA Drillers has dedicated this complete guide to talking about those. All you need to do is spare a few minutes to read these comprehensive guidelines to know and understand the preventive measures while working with diamond drills.

Compliance with Safety Regulations

Before operating a Diamond Drill

Below are some essential safety regulations you should follow before your staff operates a diamond drill. It is vital to ensure that you have everything ready to carry out the task methodically and systematically.

• Inspect the machine, and make sure that the diamond drill is off. You should ensure the plug is in proper condition because the damaged plug can stick out wires and break the wire casing.
• Look closely at the whole drilling equipment for any breaks or missing parts.
• Do not use a drill if any part is missing.
• Do not use add-on parts that are not designed for diamond drills.
• Vacuums get damaged speedily due to excessive use. Check the vacuum and make sure it is intact. Replace the vacuum if it gets exhausted.
• You should ensure that the drill is off and that any other attachments designed for the drilling are in place.
• The correct size of drill bits is essential to perform the assigned job. You will get the most precise and accurate finish.
• Ensure that the drill body and controls are adequately clean. The worker will not be able to use the drill if dirt is on it.
• If you want your diamond drill to last longer, keep it lubricated. – One can do it by feeding it water. It will save your routine, simplify the process, and provide good results.
• Check the blades. Using the sharp edges results in poor quality of work, or it can even cause an accident.

After checking all these, you will know if anything is wrong before going with the drilling process. One must remember that it will be hazardous to carry out the procedure if the drilling machine is not fully functional. Immediately correct the issue if you find any problem with the diamond drilling machine.

During the Diamond Drilling Procedure

Now that you know the compliance to follow before operating a diamond drill, we will share some essential information to adhere to while carrying out the diamond drilling technique. You should follow these steps to ensure the best practice. It also provides the safety of your workers.

• Always ensure that workers wear proper protective and tight clothing and protective gloves during the procedure. Gloves will provide a good grip and keep your hands safe. Loose clothes can get stuck in the equipment, resulting in severe accidents.
• Safe and tight clothes will help keep your hands at a distance from the drill bits. It is a sharp part, so one should safeguard the hands from getting injured.
• Keep the diamond drilling equipment stable while using it. One can do so by adequately anchoring it before use.
• Please select a suitable area to keep it stable. It will ensure optimal control over the diamond drilling equipment.
• It is essential to keep the drill lubricated throughout the procedure. Water will ensure lubrication and reduce the heat generated from the drilling.
• One should prepare the area while drilling through a ceiling or floor. Also, take precautions if there is dislodging of debris.
• Always use the drilling equipment within the speed and feed rate mentioned in the guidelines given by the manufacturer. If you adhere to guidelines provided by the manufacturer, there will be no chance of the drill getting out of control.

The health and safety regulations will help you to reduce the below objectives to as low a level as practicable.

• Fire
•  Injury or Personal Accident
•  Breaches of Security
•  Manual Handling
• Property and Environmental Damage
• Loss to the company or any individual if they fail to comply with safety legislation
• Violation of Security

Be sure to educate yourself on the safety regulations so that you do not face any danger. Pay attention to the training given and always ask questions to management about health and safety or talk to a more experienced driller. Their years of experience will help you in your job.

By following these safety regulations, you would be well aware of the design and capabilities of the equipment. You should keep in mind these points to ensure the smooth and safe process of diamond drilling. It will help you carry out the drilling techniques sincerely, safely, and responsibly. It will prevent your workers from injuries and keep them safe.

Conclusion

CA Drillers is the most trusted diamond drilling and sawing company in Kent, Surrey, Essex, London, and the UK. Our trained professionals deliver timely services and use the highest quality portable equipment. In drilling services, health and safety remain the major concern. We aim to provide an environment which is free from occupational hazards.

Call us on 08082582720 to talk to our professional about safety measures for the procedure of diamond drilling.