How to Fix a Blown out Spark Plug – 4 Easy Steps

Are you aware of a noisy popping sound coming from your engine, accompanied by way of a lack of electricity and tough idling? Chances are, you are probably handling a blown-out spark plug. While this could be an irritating and alarming problem for automobile proprietors, fear not! In this text, we can delve into the world of spark plug restoration and discuss everything you need to understand approximately fixing this commonplace automobile trouble. From knowledge of the causes of a blown-out spark plug to the step-by-step technique of repairing it, we have given you. So snatch your toolbox and get equipped to triumph over this mechanical project like a seasoned one!

How to Repair a Blown out Spark Plug

Before repairing or fixing a blown-out spark plug you must know how far can you drive with a blown out spark plug. For repairing follow these steps

Step 1: Remove the Damaged Spark Plug

Start with the aid of disconnecting the battery to save you any unintended electric-powered surprise. Use a socket and ratchet to cautiously remove the blown-out spark plug from the engine. Be sure to handle it delicately, averting any additional harm to the surrounding components.

Step 2: Inspect the Cylinder Head

After removing the remnants of the blown-out spark plug, very well look into the cylinder head for any damage or debris. Clean out any leftover residue and make sure that there are not any symptoms of cracks or different issues that might affect the new spark plug’s installation.

Step 3: Repair or Replace Threaded Hole

If there may be minimum harm to the threads, you could use a thread repair package to re-thread and restore them. However, if the harm is substantial, it is excellent to seek advice from a professional mechanic who can nicely re-tap or deploy an insert to repair the threaded hollow.

Step 4: Install New Spark Plug

Once the threaded hole is repaired, cautiously set up a brand new spark plug with the usage of a torque wrench to ensure the right tightening. Reconnect the ignition coil and start your engine to ensure that it runs easily.

How Much Does it Cost to Fix a Blown out Spark Plug?

Fixing a blown-out spark plug can be an enormous expense, starting from $100 to $400 depending on the make and version of your car. The value consists of the rate of the new spark plugs, exertions prices, and any extra upkeep that is probably wished for due to the harm because of the blown-out spark plug. Some car proprietors may additionally try to restore it themselves at a lower fee however it is essential to have the knowledge and gear required as mistaken installation can result in further high-priced damages.

Spark Plug Blowout Symptoms

By identifying the symptoms, you can prevent expensive repairs and possible engine damage. If you notice these types of signs or symptoms then definitely it could be a spark plug blowout. Here are the symptoms of a blowout spark plug.

  • Engine misfire
  • Decreased fuel efficiency
  • Difficulty starting the engine
  • Unusual engine noises
  • Sudden loss of power


In the end, fixing a blown-out spark plug may be a frightening undertaking, but with the proper equipment and expertise, it’s miles manageable. By carefully following the steps mentioned in this text, you can efficiently restore a blown out spark plug and get your engine strolling smoothly again. Remember to take some time and be patient at some point in the system, as speeding can lead to errors. With exercise and experience, you may turn out to be greater confident in dealing with this common car difficulty. So the next time you stumble upon a blown out spark plug, don’t panic – simply refer back to these commands and get geared up 1to tackle the hassle head-on!


1. Can I drive with a blown-out spark plug?

No, it is not recommended to drive with a blown-out spark plug

2. How long does it take to fix a blown-out spark plug?

The amount of experience and degree of damage determines how long it takes. It may require several hours or as little as 30 minutes.

3. Should I use an anti-seize compound when replacing a spark plug?

Yes, the use of an anti-seize compound help you in the future to prevent issues

Richard Maxwell

For any queries, email us at:- [email protected]

Related Articles

Back to top button