Netgear extenders are one of the best networking devices consider by every internet lover across the globe. However, like any other technical device, your device (Netgear extender) is also major technical issue. But, you don’t have to worry!
In this post, we’ve mentioned the topmost tips that’ll help you in boosting the performance of your Netgear WiFi range extender up to 30 percent. Why waiting? Scroll down to read more!
Fix 1: Select a Good Place for Your Device
The placement of your Netgear WiFi range extender plays a major role when it comes to the functioning and performance of your device. Therefore, before you perform Netgear extender setup, make sure that you have chosen the correct location for the device. While choosing the location of your Netgear device, keep the following points into consideration:
- Place your Netgear WiFi extender in the center-most location of your house near to your router.
- Do not place your Netgear device near in a congested, lower, or non-ventilated room.
- Also, keep your Netgear extender away from interference-creating WiFi devices like Bluetooth speakers and baby monitors.
- Avoid placing your Netgear extender near to the reach of public WiFi, doors, thick walls, and fall ceilings.
Fix 2: Have an Active Internet Connection
Another effective thing that you can do to boost the performance of your Netgear extender is have access an active and strong internet connection.
- Make sure that your Netgear extender is connected to your home router via Ethernet connection or using a wireless source.
- Contact your Internet Service Provider (ISP) and ensure that there’s no issue from their end.
- Ensure that your data plan is active and all your internet bills are clear.
- Make sure that your router is placed openly near to extender. And apart from that, your router’s firmware must be up-to-date.
Fix 3: Perform Netgear Firmware Update
Updating the firmware of your Netgear WiFi range extender plays a very important role in its functioning. Walk through the instructions highlighted below to update the firmware of your Netgear extender:
- Connect the Netgear extender to the router using an Ethernet cable or a wireless source.
- Plug the power adapter of your extender into a working wall socket and turn it on.
- Wait for a few seconds for the LEDs on your Netgear extender become green and stable.
- Turn on a PC or laptop and connect to Netgear_ext (default SSID of Netgear extender).
- Log in to your Netgear extender using www.mwifiext.net web address.
- Follow the on-screen instructions.
Note: On the off chance if you aren’t able to update the firmware of your Netgear extender by accessing www.mywifiext.net web address, then make use of 192.168.1.250default IP.
Fix 4: Switch to a Different WiFi Channel
Interference in the WiFi signals of your Netgear extender can impact the performance of your Netgear WiFi range extender. If the WiFi network of your extender keeps on getting interrupted opt for another channel.
To choose the WiFi channel for your Netgear extender, visit the www.mywifiext.net setup page.
Fix 5: Don’t Share the Extender’s WiFi Password
To make your Netgear extender performing well, it is suggested – do not share the password of your device. And if you want to share the password of your Netgear extender, create a separate network for your guest and relatives by using the guest access network.
Download the Netgear app, follow the on-screen instructions to enable the guest access feature.
The Bottom Line
That’s all! Our post on how to boost the performance of your Netgear WiFi range extender ends here. In case you have any doubts or queries regarding how to boost the performance of your Netgear extender, waste no time and drop your concerns in the comments section.