Home Information Are LED Grow Lights A Fire Hazard?

Are LED Grow Lights A Fire Hazard?

- Advertisement -

With the growing popularity of indoor gardening, plant lights have become an essential and important investment. In recent years, LED grow lights have become a widely popular alternative to high-pressure sodium (HPS) lamps, halogen lamps, and fluorescent lamps. LED plant lights are ubiquitous.

  • Basement planting
  • Home grow tent gardening
  • Fine-grained greenhouse gardening
  • Scaled vertical farms

Some novice growers do not understand how do LED grow lights work and they will wonder – are LED grow lights a fire hazard?

The answer is, no. Traditional grow lights like halogen lights are still a major cause of fires in residential areas because of the amount of heat they can give off. As technology advances and introduced LED, the fire risk in LED spider light equipped with LED is almost negligible.

Are LED Grow Lights A Fire Hazard?

LEDs are the safest choice among grow lights suitable for indoor growing. They are also less likely to be damaged by voltage fluctuations. Because they are not like traditional lamps like hot filament work, but solid-state electronic devices run.

LED for vegetative growth using semiconductors to transmit current through diodes. It uses 75% less electricity and 25% longer lamp life than conventional lamps. Furthermore, it emits much less heat than traditional bulbs.

They don’t generate enough heat to cause a fire by themselves. Low heat, low energy consumption and low fire risk make LED grow lights a safer and more popular choice for indoor or grow tent kits.

Other Causes of Grow Room Fires

Perhaps the cause of a grow room fire is not the light itself. Incorrectly set up electrical wiring or poorly maintained electrical connections may be at greater risk of fire in a grow room. For example, many plant growers placed lights near water, and they may also be subject to overloaded circuits if the water droplets do not adapt well to the wires.

In the event of a fire, a grow room with little space can spread quickly, and fertilizer can fuel the flames. The following points need to be considered to ensure that your indoor garden setup then does not pose a threat to your safety.

  1. If your setup is complex, have a professional do the wiring if necessary. A professional can show you how to do it properly, as poor wiring and overloaded circuits can lead to fires.
  2. If your setup is complex, have a professional do the wiring if necessary. A professional can show you how to do it properly, as poor wiring and overloaded circuits can lead to fires.
  3. If your setup is complex, have a professional do the wiring if necessary. A professional can show you how to do it properly, as poor wiring and overloaded circuits can lead to fires.
  4. If your setup is complex, have a professional do the wiring if necessary. A professional can show you how to do it properly, as poor wiring and overloaded circuits can lead to fires.
  5. If your setup is complex, have a professional do the wiring if necessary. A professional can show you how to do it properly, as poor wiring and overloaded circuits can lead to fires.

How to Tell If There is Too Much Heat from LED Grow Lights

The state of your plants will inform you if they are getting more or less heat from the LED grow lights. This is the reason you need to check your plants regularly. Only by doing so will you quickly notice changes in texture, and color, or if your plants are losing their leaves.

Here are 6 signs that your plants are getting too much heat from the LED spider light, and if you don’t address the problem, your plants could be on the verge of fading because of your negligence.

  • Browning leaf tips
  • Yellow leaves
  • Curled leaves
  • Brown spots on stems
  • Wilted stems and leaves
  • Leaves of the plant falling off from the top

As soon as you notice signs of heat stress, adjust the distance between the light and the plant.

Conclusion

The first step in ensuring the safety of your indoor plants and home is to ensure that you purchase your lighting from a reputable source.

The second step is to properly maintain electrical equipment and to replace equipment and wiring as it deteriorates. This will help maintain a safe grow room environment.

The third step in preventing fires in the grow room is to remove all unnecessary combustible materials from the room. Do not allow trash such as dried plant material, paper and cardboard containers, and packaging to accumulate in your grow room.

The lighting you use in your grow room or grow tent can start a fire if you do not take the precautions prescribed for its use. Therefore, it is important to choose your LED grow lights carefully after assessing the hazards of your grow room location and taking care of the installation.

- Advertisement -

Must Read